|Jack's Magic® Stain ID Kit remove|
The Jack's Magic Stain ID Kit is the first step in performing a successful stain removal. It is designed to take all the guesswork out of removing swimming pool stains and ensure that the pool owner doesn't purchase products they don't need. One of the 4 simple topical tests will identify what best removes a swimming pool stain, saving both time and money. Please note: The water should be at least 65-70 degrees in order to insure accurate testing results.
|Directions||1. Make sure the pool is properly balanced for stain identification and removal. 2. Turn pool pump off and allow water to calm. PLEASE NOTE: For easily accessible stains (i.e. top step or swimout), identification product(s) may be applied directly from packet to stain. For pool walls and floor, identification product should be poured into (seperate) nylon hosiery (or similar porous container), and allowed to sit on test stain area for 30-45 seconds. IMPORTANT: Do not mix products in nylon hosiery or other container. 3. Apply approximately 1/2 packet of Stain Solution #1 over a stained area. Let sit for 30-45 seconds, then brush away (Stain Solution #1 Treatment). 4. Apply approximately 1/3 packet of Stain Solution #2 over a stained area. Let sit for 30-45 seconds, then brush away (Stain Solution #2 Treatment). 5. Apply approximately 1/2 packet of O2 Safe SHock over a third stained area. Let sit for 30-45 seconds, then brush away. (O2 Safe Shock & Stain Solution #2 Treatment). 6. Apply approximately 1/3 packet of Stain Solution #2 over a fourth stained area. Let sit for 30-45 seconds, then brush away. Follow with 1/2 packet for Stain Solution #1. Let sit for 30-45 seconds, then brush away (Iron Scale Treatment). 7. Determine which topical treatment most effectively removed your stains and follow the stain removal treatment according to directions.|